Introduction
This machine is not only used for straightening the network cable, but also often used in the processing of Type-C, USB3.1, HDMI and other multi-core industrial control lines. With safety cover.Simple Operation
(1)Put the peeled cable in the middle of the rubber block of the machine. (2)Then press the foot switch, the rubber block is rubbed back and forth. (3)When the machine is rubbing the cable, pull out the cable. The processing time should be 1-2 seconds. (4)The core wire of cable can be loosened and straightened.Specification
| Model | LJL-028 |
| Straightening length | 10-80mm |
| Voltage | AC220V 50/60HZ 24V 100W |
| Air source | 0.5-4MPa |
| Suitable size | AWG18-AWG32 |
| Machine Size | 250*380*H240mm |
| Machine weight | 13KG |
| Applicable cable | Network cable, Type-C cable, USB3.1 cable, HDMI cable, twisted cable, multi-core cable |
 | |
